ExxonMobil Product Solutions in the North American Supply Chain

Product scope Butyl and halobutyl rubber, EPDM (Vistalon), and the polyolefin elastomer modifiers under TPE and TPV compounds; the butyl position is the one that matters here because butyl is the permeation barrier a sanitation hose is built around

NA footprint Spring TX; Baton Rouge LA and Baytown TX

Product scope Vistalon EPDM for weatherstrip, coolant hose, and molded goods; Exxpro butyl and Vistamaxx modifiers

NA footprint TX, LA

Product scope PP, impact copolymer PP, Exxtral TPO, Vistamaxx modifiers

NA footprint TX, LA

Product scope Polypropylene homopolymer and random copolymer, including the high melt flow fiber grades that spunbond and meltblown lines run and the grades behind filtration media; a fiber grade PP position is a different qualification from a molding grade one

NA footprint Spring TX; plants in TX and LA

Product scope PP homopolymer and impact copolymer, HDPE, and Vistamaxx modifiers for filled PP compounds

NA footprint TX, LA

Product scope High melt flow rate polypropylene homopolymer for meltblown and spunbond, plus the metallocene and Vistamaxx grades that give a softer hand at the same barrier level; the resin decision that sets whether a meltblown line can run at the fiber diameter the media needs

NA footprint Spring TX; Baytown and Baton Rouge polypropylene

Product scope Vistalon EPDM and butyl and halobutyl rubber; the EPDM position matters across every potable water and hydronic seal on this lens, and the butyl line underpins the low-permeation work on refrigerant service seals

NA footprint Spring TX; Baton Rouge LA and Baytown TX

Product scope PP homopolymer and impact copolymer, HDPE, and Vistamaxx modifiers for filled and impact-modified PP compounds

NA footprint TX, LA

Product scope Escorez hydrocarbon tackifier resins, Vistamaxx propylene-based elastomers, and the polyethylene and polypropylene grades that go into hot melt formulations and tape backings; the tackifier line puts it inside almost every hot melt in the lens whether or not the formulator says so

NA footprint Spring TX; Baytown and Beaumont TX; Baton Rouge LA

Product scope Polyethylene (LDPE, LLDPE, HDPE) and polypropylene for film, closures, and rigid containers

NA footprint Spring TX; Baytown, Beaumont, and Mont Belvieu TX; Baton Rouge LA

Product scope PP homopolymer and impact copolymer, HDPE, and Vistamaxx modifiers used to toughen the filled PP compounds that deck shells and housings run on

NA footprint TX, LA